Lexmark W850 Linking exit bins, Assigning a Custom Type <x> name

Linking exit bins
The standard exit bin holds up to 500 sheets of 64–216 g/m2 (17–58 lb) paper, depending on the printer model . If you
need additional output capacity, you can purchase other optio nal exit bins.
Note: Not all exit bins support every paper size and type.
Linking exit bins lets you create a single output source so the printer can automa tically switch output to the next available
exit bin.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press the up or down arrow button until Paper Menu appears, and then press .
4Press the up or down arrow button until Bin Setup appears, and then press .
5Press the up or down arrow button until the correct tray appe ars, and then press .
6Press the up or down arrow button until Configure Bins appears, and then press .
7Press the up or down arrow button until Link appears, and then press .
Assigning a Custom Type <x> name
Assign a Custom Type <x> name to a tray to link or unlink it. Associate the same Custom Type <x> name to each tray
that you want to link. Only trays with the same custom names assigned will link.
1Make sure the printer is on and Ready appears.
2From the printer control panel, press .
3Press .
The Paper Menu appears.
4Press .
The Paper Size/Type menu appears.
5Press the down arrow button once.
appears next to the name of the tray.
6Press .
The Paper Size menu appears.
7Press again.
The Paper Type menu appears.
Loading paper and specialty media 55