Lexmark W850 manual Installing a printer hard disk

Additional printer setup 21

5Push the internal print server or port interface card firmly into the card connector on the system board.

6Insert a screw into the hole on the right side of the connector slot. Gently tighten the screw to secure the card to the system board tray.

7Reinstall the system board.

Installing a printer hard disk

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Warning—Potential Damage: System board electrical components and hard disks are easily damaged by static electricity. Touch something metal on the printer before touching any system board electronic components, connectors, or the hard disk.

Note: A #2 Phillips screwdriver is needed to attach the hard disk to the mounting plate.

1Access the system board.

2Remove the mounting plate, hard disk, ribbon cable, and attachment screws from the package.