Lexmark W850 Installing internal options, Available internal options, Additional printer setup

Additional printer setup 15

Additional printer setup

Installing internal options

CAUTION—SHOCK HAZARD: If you are accessing the system board or installing optional hardware or memory devices sometime after setting up the printer, then turn the printer off, and unplug the power cord from the wall outlet before continuing. If you have any other devices attached to the printer, then turn them off as well, and unplug any cables going into the printer.

Available internal options

•Memory cards

–Printer memory

–Flash memory

–Fonts

•Firmware cards

–Bar Code and Forms

–IPDS and SCS/TNe

–PrintCryptionTM

•Printer hard disk

•LexmarkTM Internal Solutions Ports (ISP)

–RS‑232‑C Serial ISP

–Parallel 1284‑B ISP

–MarkNetTM N8150 802.11 b/g/n Wireless ISP

–MarkNet N8130 10/100 Fiber ISP

–MarkNet N8120 10/100/1000 Ethernet ISP

All of these options may not be available. For more information, contact the place where you purchased the printer.