Lexmark W850 manual Verifying printer setup, Printing a menu settings

Additional printer setup 27

USB port

Ethernet port

Verifying printer setup

•Print a menu settings page to verify that all printer options are installed correctly. A list of installed options appears toward the bottom of the page. If an option you installed is not listed, then it is not installed correctly. Remove the option and install it again.

•Print a network setup page to verify that your printer is correctly connected to the network. This page also provides important information that aids network printing configuration.

Printing a menu settings page

Print a menu settings page to review the current menu settings and to verify printer options are installed correctly.

Note: If you have not made any menu item settings changes yet, then the menu settings page lists all the factory default settings. Once you select and save other settings from the menus, they replace the factory default settings as user default settings. A user default setting remains in effect until you access the menu again, choose another value, and save it. To restore the factory default settings, see “Restoring the factory default settings” on page 136.

1Make sure the printer is on and Ready appears.

2From the printer control panel, press .

3Press the up or down arrow button until Reports appears, and then press .

4Press the up or down arrow button until Menu Settings Page appears, and then press . After the menu settings page prints, the printer returns to the Ready state.