Sleep | Lexmark X500n, X502N specs

Set Correct Paper

Not all paper sizes are supported for faxing. An unsupported paper size is loaded in the tray. Load a supported paper size.

Sleep

The printer is saving power while it waits for the next print job.

TAD Answering

An answering machine has answered the call. Wait for the message to clear.

Toner Error: Install Supported Toner Cartridge

An invalid toner cartridge is installed. Remove the toner cartridge, and then install a supported one.

Transmitting

The printer has connected with the receiving fax machine and is sending a fax. Wait for the message to clear.

Toner Low <xxxx>

The toner cartridge(s) of color “x”—K (black), M (magenta),Y (yellow), or C (cyan)—will soon be exhausted. The specified toner cartridge can print approximately 100–125 pages, depending on the coverage of the toner color, after this message first appears.

When Toner Low <xxxx> appears or when the print becomes faded, follow these steps to extend the life of the toner cartridge(s):

1Remove the toner cartridge(s).

2Firmly shake the cartridge(s) side-to-side and front-to-back several times to redistribute toner.

3Reinsert the toner cartridge(s) and continue printing.

Note: Repeat this procedure multiple times until the print remains faded, and then replace the toner cartridge(s).

Tray <x> Missing: Insert Tray

Tray 1 and/or Tray 2 is missing. Insert the specified tray(s) into the printer.

TR Belt Life: Replace Transfer Belt

The transfer belt is exhausted. Install a new transfer belt.

TR Kit Life: Replace PQ Kit

The transfer roller and transfer belt cleaning roller are exhausted. Install a new transfer roller and a new transfer belt cleaning roller.

TX Comm Error

An outgoing fax transmission error has occurred. Resend the fax.

Warming up

Wait for the message to clear.

Waste Pack Full

The waste toner bottle is full or missing. If it is full, replace it using the instruction sheet that came with the replacement waste toner bottle. If it is missing, install it.

98

Image 98

Lexmark X500n, X502N manual Sleep

Contents

X500n, X502n Users GuidePage Contents Scanning PrintingCopying Faxing Clearing jams Understanding printer messages Administrative supportUnderstanding printer menus Maintaining the printer Troubleshooting 117 137 Safety information Basic model Configured modelsLearning about the printer Page Fully configured model Understanding the control panel Control panel item Description Control panel item Description Control panel item Description Choosing a fax connection Using an RJ11 adapterGetting the printer ready to fax Country/regionPage Country/region Connecting directly to a telephone wall jack Connecting directly to a telephone wall jack in Germany Connecting to a telephone Connecting to an answering machine Page Connecting to a computer with a modem Setting the outgoing fax name and number Setting the date Setting the time Installing options Installing a 530-sheet drawer Securing the 530-sheet drawer to the printer Attaching cables Ethernet port USB symbol USB port Loading paper and specialty media Loading traysPage Page Converting the standard tray to a legal-size tray Page Page Setting the Paper Type Setting up the standard exit bin Linking trays Paper guidelines Paper characteristicsPaper and specialty media guide Selecting paper Using letterheadUnacceptable paper Selecting preprinted forms and letterhead Using transparencies Using envelopes Using labels Using card stock Storing paper Supported paper sizes, types, and weights Supported paper sizes Supported paper types Supported paper weights Paper capacitiesPage Printing Installing printer softwarePrinting the configuration Printing a document from Windows Canceling a print job Printing the demo Click the trash icon Making a copy Customizing copy settingsCopying Selecting a paper tray for copies Selecting a paper size for copies Reducing or enlarging copies Making a copy lighter or darker Adjusting copy qualityCopying multiple pages onto a single sheet Collated Not collated Canceling a copy jobCollating copies Scanning a document using the computer Scanning Scanning text for editing Customizing scan settings using the computerScanning documents directly to other applications General tab Select Moire Reduction Scanning clear images from magazines or newspapersScanning to a computer over the network Customizing scan settings from the control panel Setting up the scan directoryCanceling a scan job Searching the scan directory Making a scanned image lighter or darker Sending a fax Sending a fax using the ADFFaxing Sending a broadcast fax Sending a fax using the scanner glassCanceling a broadcast fax Sending a fax at the end of a conversation Canceling a fax jobSending a fax while listening to a call On Hook Dial Understanding the fax receive modes Setting the fax receive modeReceiving a fax Receiving a fax at the end of a conversation Printing fax activity reports Adjusting fax activity report settingsSetting up Quick Dial numbers Receiving a fax from an extension telephone Printing the Speed Dial list Setting up Speed Dial numbersPrinting the Quick Dial list Adjusting the volume Customizing dial settingsSetting the dialing mode Understanding the dialing options Setting up to fax while behind a PBX Making a fax lighter or darker Customizing fax settingsChanging the fax resolution Reducing the print size of an incoming fax Setting up real time fax transmissionSelecting a paper tray for incoming faxes Understanding jam messages and locations Clearing jamsAvoiding jams Rear door bottom ADF doorRear door top Optional 530-sheet tray Tray Clearing Tray 1 jams Page Clearing Tray 2 jams Clearing jams behind the rear door Paper jam in the ADF Paper Jam B Paper Jam CPage Page Close the ADF cover Press Understanding printer menus Copy Settings menuScan Settings Fax Settings Fax Directory Admin Settings Menus list Density SortQuality Reduce/Enlarge Scan Settings menu Limitation of size of mail Fax Settings menuTX Settings Delete Document RX SettingsTray Settings Fax Directory menu Comm SettingsReport Settings Quick Dial Entry Paper Settings Machine Settings menuSpeaker Volume Speed Dial Entry Job Timeout Toner Saver Mode Supplies Info Scanner Carriage Network Settings menu Reports Print menu Admin Settings menu Power Saver PBX Access DigitDefault Mode Auto Clear Setting Default Admin Menu Lock List of status and error messages Understanding printer messages Cover Open Close OPC Cover Missing Install Fuser Unit Place Next Page Then Press Set Sleep Maintaining the printer Cleaning the printerCleaning the exterior of the printer Storing supplies Cleaning the scanner glass 100 Cleaning the dust-proof glass 101 102 103 104 105 106 Ordering suppliesOrdering toner cartridges Ordering a photodeveloper cartridge Moving the printerOrdering a fuser Ordering a waste toner bottle Locking the scanner 108 Removing the printer from the 530-sheet drawer 109 110 111 112 Setting the printer up in a new locationMoving the printer to another location 113 Changing the administrator menus password Administrative supportLocking the administrator menus Adjusting Power Saver 115 Restoring factory default settingsSetting the Default mode 116 Using the Embedded Web ServerTurning on Auto Clear Online customer support Checking an unresponsive printer TroubleshootingSolving printing problems Control panel display is blank Unexpected page breaks occur Job takes longer than expected to printTray linking does not work Scanner unit does not close Solving copy problemsCopier does not respond Poor copy quality Partial document or photo copies Scan was not successful Solving scan problemsScanner does not respond Scanning takes too long or freezes the computer Cannot scan from a computer Solving fax problemsPartial document or photo scans Cannot send or receive a fax Do you have Voice Mail service? Review this digital phone service checklistTemporarily disable Call Waiting Check the printer connections Can send but not receive faxes Can receive but not send faxes Received fax has poor print quality Solving option problems Drawers Paper frequently jams Solving paper feed problemsSolving print quality problems Paper jam message remains after jam is cleared Smeared vertical print Color misregistrationLight colored line, white line, or incorrectly colored line Streaked horizontal lines Streaked vertical lines Print is too light Make sure the Color Adjustment settings are not too lightCheck the Media Type setting Print irregularities Gray background Print is too darkTransparency print quality is poor Incorrect margins Uneven print densityGhost images Skewed print Is the toner cartridge defective or empty? Blank pagesClipped images 133 Toner specks Solid color pagesPaper curl Toner rubs off FAQ about color printingWhat is RGB color? 135 Contacting Customer Support 136 Edition notice 137 Industry Canada compliance statement 138 European Community EC directives conformity 139 Noise emission levels 140 141 New Zealand Telecom equipment notice 142 Power consumption 143 Off mode 144 Extent of limited warranty 145 Numerics SymbolsIndex 146 147 148 149 150