Turning on Auto Clear

Auto Clear specifies whether the printer automatically returns to the Default Mode setting after the set amount of time if no operation is done during that time. To turn on Auto Clear and set the time-out duration:

1Make sure the printer is on and Ready appears.

2From the control panel, press .

3Press or repeatedly until Admin Settings appears, and then press .

4Press or repeatedly until Auto Clear appears, and then press .

5Press or repeatedly until On appears, and then press .

6Press or repeatedly to choose the time duration, and then press .

7Press to return to the Ready state.

Using the Embedded Web Server

If the printer is installed on a network, the Embedded Web Server can be used for the following functions:

Checking the status of the printer

Checking the status of the printer supplies

Setting up the scan directory

Setting up the fax Speed Dial list

Configuring network settings

Creating an Embedded Web Server administrator password

Printing reports

Restoring the factory default settings of the printer

Backing up Embedded Web Server settings

To access the Embedded Web Server:

1Open a Web browser.

2In the address bar, type the network printer or print server IP address, and then press Enter.

116

Page 116
Image 116
Lexmark X500n, X502N manual Turning on Auto Clear, Using the Embedded Web Server, 116