EZ-Manager Wizard (Cont.)

(Continued from previous page)

If the process is successful, no further user interaction is required, though, in some instances, where the option (for example “NEXT”) is available, you may manually move forward to subsequent steps within the wizard to speed up the process.

PROCESSING THE PRO:CENTRIC CONFIGURATION

 

Downloading the Pro:Centric application files takes a few minutes.

 

 

 

 

Please wait...

 

 

 

 

 

2%

 

 

 

 

 

 

 

 

 

 

 

Retrieving files from data channel 70

 

 

 

Application files

In progress...

 

 

 

Maintenance Files

Synchronizing...

03

Warning - Do not remove AC power or the signal cables during these steps.

Note: If, after completing the search, the STB is unable to find the Pro:Centric data channel (while the Searching for Pro:Centric Server screen is on display), the wizard will stop and show a Diagnostics screen that enables you to manually return to the previous screen (to reinitiate the configuration) or exit the wizard.

When the Pro:Centric Configuration is complete, an EZ-Manager Configuration Complete screen is displayed (see example below), and after 10 seconds, the wizard exits, and the STB turns OFF.

EZ-MANAGER CONFIGURATION COMPLETE

STB will turn off in 10 second(s)

 

Installed Components

 

Installed Components

Pro:Centric Application

GEM application downloaded

Pro:Centric Application

GEM application downloaded

Maintenance Files

STB-3000_Config.tlx

Maintenance Files

LY970H_Config.tlx

REBOOT

TURNOFF

04

 

Note: With the EZ-Manager Configuration Complete screen on display, you can also manually turn off or reboot the STB. If desired, select TURN OFF or REBOOT, respectively, and then press OK on the Installer Remote.

20

206-4272