Reference: Using Media Share Features (Cont.)

(Continued from previous page)

2.Follow the on-screen instructions to initiate the Miracast / WiDi connection from your Miracast / WiDi device. Note that you may be prompted to enter a PIN number that appears on the display panel screen into your Miracast / WiDi connection window to complete the connection.

Once the connection is established, the STB display may be used as a second screen for the Miracast / WiDi device.

SoftAP

The following steps describe how to access and use the SoftAP feature.

1.Turn ON the STB/display panel, and press MENU on the Installer Remote to display the STB menus (either the setup menus or the Function Menu depending on whether the STB is or is not in Pass-through Mode).

2.Use the Up/Down arrows to select/highlight the General menu icon, and then press OK.

3.In the General Menu, use the Up/Down arrows to select SoftAp, and then press OK.

4.When you initially access the SoftAP screen, the OFF/ON toggle button at the top right of the screen is selected/highlighted by default. If SoftAP is currently OFF, press OK on the Installer Remote to turn SoftAP ON. When SoftAP is ON, the SoftAP access information, including the SSID and security key, is displayed in the lower half of the screen.

5.Make sure Wi-Fi is turned ON on your device, and then look for the STB’s SSID in the list of available Wi-Fi networks. Initiate the connection, and enter the security key as requested.

Once a device is connected successfully to the STB’s network, you can use it to access the Internet. Up to five devices may be connected at a time; the Number of Connected Devices field in the SoftAP screen shows the number of devices currently connected to the STB Wi-Fi access point.

Note: A wired network connection MUST be established in order for guests to use SoftAP. Also, the SoftAP feature may only be used while the STB/display panel is turned ON.

Note: If the Wi-Fi frequency is not automatically detected, set the frequency in the device(s) to 2.4 GHz.

Quick GENERAL

Picture

Language

 

 

Room Info

Sound

Time & Date

 

 

Timers

 

SIMPLINK

General

Set ID ^

 

 

1

Wi-Fi Direct

Safety

SoftAP

TV Name

410KKTF1J505

Accessibility

Quick

Picture

Sound

General

Safety

Accessibility

SOFTAP

ON

SoftAP enables the STB to act as a wireless access point to provide Internet access for up to five Wi-Fi devices.

Note: A wired network connection MUST be established and the STB/display panel must be turned ON.

SoftAP Access Information

SSID 410KKTF1J505

Security Key

LGxxxxxx

Number of Connected Devices 0

Note: The example at left shows the General Menu when the STB is in Pass-through Mode. The SoftAP screen is the same whether the STB is or is not in Pass-through Mode.

74

206-4272