Reference: Using Media Share Features (Cont.)(Continued from previous page)
3.In the General Menu, use the Up/Down arrows to select Wi-Fi Direct, and then press OK.
4.When you initially access the Wi-Fi Direct screen, the OFF/ON toggle button at the top right of the screen is selected/highlighted by default. If Wi-Fi Direct is currently OFF, press OK on the Installer Remote to turn Wi-Fi Direct ON. This will prompt the STB to search for all available Wi-Fi Direct enabled wireless devices, including mobile devices, laptops, etc. Devices found will be listed in the lower half of the screen.
Note: If the search does not initially locate any devices, you can select REFRESH LIST and press OK to rescan.
5.Use the Up/Down arrow keys to select/highlight the device with which you wish to share, and then press OK.
6.A pop-up window will prompt you to confirm your connection request. Select Yes and press OK to continue.
The share request will be sent to the targeted device. The user of that device may choose to allow or not allow the share connection. Similarly, once Wi-Fi Direct is turned ON, other devices may request share connections with this STB (pop-up share requests typically appear in the bottom right of the display panel screen).
7.Use one of the following methods to access media files/folders on the STB, depending on the current configuration of the STB:
•If the STB is in Pass-through Mode (i.e., the Pro:Centric application is not loaded), press the PORTAL button on the Installer Remote, and use the Left/Right arrow keys to select SmartShare from the STB’s Smart Launcher.
•If the STB is not in Pass-through Mode, use the Up/Down arrow keys on the Installer Remote to select the SmartShare option from the General Menu.
Note: Depending on the remote control being used (in any mode), you may also access the Smart Launcher via the SMART button.
8.In the Smart Share screen, select the desired Smart Share device, and then select the desired media category to view files.
Screen Share (Miracast / WiDi)
The following steps describe how to access and use the Miracast / WiDi features.
1.Turn ON the STB/display panel, and then use one of the following methods to access the Screen
Share application, depending on the current configuration of the STB:
•If the STB is in Pass-through Mode (i.e., the Pro:Centric application is not loaded), press the PORTAL button on the Installer Remote, and use the Left/Right arrow keys to select Screen Share from the STB’s Smart Launcher.
•If the STB is not in Pass-through Mode, press MENU on the Installer Remote to display the Function Menu, use the Up/Down arrows to select/highlight the Input menu icon, and then press OK. Then, use the Up/Down arrows to select the Screen Share option from the Input Menu.
Note: Depending on the remote control being used (in any mode), you may also access the Smart Launcher via the SMART button.
(Continued on next page)
