IP Environment Setup (Cont.)

(Continued from previous page)

Pro:Centric Application Mode Configuration

Select/highlight the Mode field and and press OK on the Installer Remote to display the drop-down list of options. Then, use the Up/Down arrow keys to select the appropriate Pro:Centric Application Mode setting—Configuration Only, FLASH, GEM, or HTML. If the Pro:Centric Application Mode is set to “Configuration Only,” Pro:Centric application data will not be downloaded.

Note: If the mode has already been set in the Installer Menu (item 098 PRO:CENTRIC) or in the EZ-Manager Wizard, the specified mode will be reflected in this field. If you change the mode in this menu, Installer Menu item 098 will now reflect the value you selected here.

3.Select/specify the appropriate Update Event setting(s), as required. Based on Update Time settings, the Wake For Update feature wakes the STB once daily to check for, and if applicable, download updates from the Pro:Centric server. See Installer Menu item 121 UPDATE TIME HR description on page 38 for additional information on Wake For Update functionality.

•To toggle between ON and OFF in this menu, select/highlight the Update Event field and press OK on the Installer Remote. When Update Event is set to “ON,” an Update Time field is displayed on the screen.

•If Update Event is ON, set the Update Time as required. Use the arrow keys on the Installer

Remote to select/highlight the Update Time field, and then press OK. Hour, Minute, and Meridiem fields will be displayed. Select each field in turn and specify the appropriate Wake For Update time, as desired. Note that the Update Time set in this menu is based on a 12-hour clock. Ensure the meridiem (AM/PM) specification is set accordingly.

4.Once all fields are completed as required, use the arrow keys on the Installer Remote to return to the IP Environment Menu, as necessary, or press to exit the IP Environment Menu.

Network Configuration

This section describes each of the options available in the Network Menu (see example at right). Refer to the appropriate subsection(s) on the following pages.

Note: If you intend to use the Wi-Fi Zoning feature with cloning configuration, you must configure the wireless network connection as part of the Master STB Setup.

See “Configuring a Wi-Fi Network Connection” on page 58 for further information.

Accessing the Network Menu

With the IP Environment Menu on display, use the arrow keys on the Installer Remote to select the Network menu option. Then, press OK.

Note: The STB’s MAC address is displayed at the top of the Network Menu screen and cannot be modified.

Pro:Centric

NETWORK

 

Network

 

 

 

MAC Address

AA:45:F7:52:F8:0F

 

Network Setting

 

Pre-loaded Apps

IP Stream Control

 

 

 

 

Wake On LAN

 

 

Media Share

 

56

206-4272