Ez Download Utility (Cont.)

(Continued from previous page)

Update progress will be shown in a new screen. Do NOT remove the USB device while updates are in progress. When the Ez Download process is complete, an overview of the results will briefly be displayed and then, depending on the type(s) of updates completed, you will either be returned to program viewing or the STB will reboot (see note below).

Note: If the STB’s CPU or PTC software has just been updated, the STB will reboot after the Ez Download process is complete. The STB will also initiate a reboot if you updated the STB configuration with a TLX file that included a change to Installer Menu item 105 VID OUT FORMAT (the new screen resolution will additionally require user confirmation after reboot—see item 105 description on page 37).

11.Remove the USB memory device, and verify that the appropriate configuration/update(s) is/are resident on the STB.

Note for TLX configuration: When configuration (and, if applicable, an STB reboot/confirmation of new screen resolution) is complete, the STB tunes according to the Start Channel setting in the Installer Menu. If a Start Channel is specified, the STB will tune to that channel, though in the case of FTG Mode configuration, a channel banner will only be displayed if the Start Channel is included in the FTG Channel Map (depending on your selection in step 9, the channel banner will display either the Start Channel’s logical channel number or physical RF channel number). Otherwise, the STB will either return to the last channel tuned (STB in Pass-through Mode) or tune to the first channel in the FTG Channel Map (STB in FTG Mode). In the latter case, remember that the channels in the FTG Channel Map are always arranged in logical order, regardless of your selection in step 9.

28

206-4272