STB Configuration Options
From the STB Configuration Options screen, you can choose how to proceed with the configuration of this STB/display (assuming you do not opt to exit the wizard, which you may also do at any time).
Note: If you intend to use the Zoning feature(s) on the STB for
STB CONFIGURATION OPTIONS | 01 |
. To configure the STB for Pro:Centric operation, select NEXT.
. To set the optional Zoning features, select ZONES & ROOM NUMBER.
. To access the STB Manager / USB Download Menu, select USB CONFIGURATION.
This setup wizard will continue automatically in 60 seconds.
EXIT | USB CONFIGURATION | ZONES & ROOM NUMBER | NEXT |
Note: If there is no user action in this screen within one minute, the wizard will automatically continue to the next configuration step.
Use the Left/Right arrow keys on the Installer Remote to navigate between options on this screen. Each time you select/highlight one of the following options, the screen text and fields will change in accordance with your selection.
•To continue with Pro:Centric configuration, select NEXT (default) and press OK on the Installer Remote. Refer to “Configure Pro:Centric Settings” on pages 19 to 23 for additional information.
•To set the Zoning feature(s) on the STB, select ZONES & ROOM NUMBER. See “Zones and Room Number Assignments” below for further information.
•Select USB CONFIGURATION to access the STB Manager / USB Download Menu. See “USB
Configuration” on pages 23 to 24 for further information.
Note: If you choose to exit the
Zones and Room Number Assignments
You may complete one or more of the fields in the Zones, Label, and Room Number screen or leave them at their default settings (TV Zone and
17 |