Custom Master STB Setup (Cont.)

(Continued from previous page)

4.Set up STB/display panel features.

On-screen setup menus control the features of the STB/display. Press MENU on the Installer Remote to access the STB setup menus, and then set Channel, Picture, Sound, etc. options to the desired configurations. See “Clonable STB Setup Menu Features” list on page 39 and also notes below.

Note: If you intend to use the Zoning feature(s) on this STB, make sure to assign the appropriate TV Zone # and/or Wi-Fi Zone # at this time as described in Reference section, “Using the STB’s Zoning Features.”

Note: If desired and if appropriate, you can run Auto Tuning (see step 5) prior to completing this step.

5.(Optional) Run Auto Tuning.

If you are creating a Master STB Setup and you wish to retain the default Pass-through Mode for the Target STB(s), do NOT run Auto Tuning. If you Learn an auto-tuned/edited channel lineup from a Master STB Setup, thereby creating a TLX file with an FTG Channel Map, and then Teach the TLX file to a Target STB, this will put the Target STB in FTG Mode. See also notes below.

Note: When you Teach a TLX file that contains an FTG Channel Map to a Target STB (for FTG Mode configuration), you may have the option to select either logical or physical channel tuning. For either selection, the channel sequence will be based on the order in which the channels appear in FTG Channel Map. You can view and/ or edit the channel sequence in the FTG File Manager, as required.

Note: Decryption of Pro:Idiom encrypted channels will not be enabled unless you use the FTG File Manager to set the channel attributes.

a)Use the Installer Remote to access the Quick Settings Menu. Then, select Channels > Channel Tuning and follow the on-screen instructions to search for all available analog and digital channels.

b)Use the Channel Manager option in the Channels Menu to edit the channel lineup, as necessary. Add/delete channels per your system requirements.

6.Verify the STB/display panel setup.

Make sure the STB/display features are set per your requirements. Also, if applicable, verify that the channel lineup is correct.

The Master STB Setup is now ready to be saved to a USB memory device. See “Cloning Procedures” on pages 42 to 47.

Quick QUICK SETTINGS

Picture

Channels

Aspect Ratio

16:9

Sound

Sleep Timer ^

Off

General

Safety

Accessibility

Use the STB setup menus to set the display features to the desired configuration for the end user.

Quick CHANNELS

Picture

 

 

Channel Tuning

 

Channel Manager

Sound

Channel Label

 

 

Multi Audio ^

 

MONO MONO

General

Audio Language ^

 

 

None

Safety

 

Accessibility

(Optional) Use Channels Menu options to run Auto Tuning and edit the channel lineup.

206-4272

41