If you are using an LG display panel, the LG remote provided with the display panel should be sufficient. However, if you are using a commercial
The STB Installer Remote illustrated on the right shows typical remote control functions and is provided for reference only.
For additional information and/or to purchase an STB Installer Remote, please contact your LG service representative.
Installer Remote Functionality
The STB Installer Remote provides the same standard configuration functionality as a typical LG Installer Remote, along with
Programming the STB Installer Remote
This section describes how to program the STB Installer Remote to send unique IR codes based on “bed number” in a
Note: The STB will always respond to the standard LG Installer Remote IR code scheme, regardless of its
The following procedure describes how to program the bed number in the STB Installer Menu and in the STB Installer Remote.
1.Installer Menu item 020 FEATURE LEVEL determines the additional IR code scheme to which the STB will respond. Access the STB Installer Menu, and set item 020 to the desired value.
The STB Installer Remote must now be programmed to match the FEATURE LEVEL setting. That is, if item 020 is set to 17 for Bed 2, the STB Installer Remote must also be set to Bed 2.
Note: In its default state, the STB Installer Remote uses the standard LG Installer Remote IR code scheme.
2.On the STB Installer Remote, press and hold OK along with the desired (bed) number key.
The TV LED at the top left of the remote will light for three seconds and then turn OFF.
3.Once the TV LED turns OFF, release both keys on the remote.
4.Verify the remote functionality, based on your settings.
Note: If necessary, you can restore the default STB Installer Remote IR code scheme by pressing and holding OK on the remote along with the “0” key.
TV DVD INPUT
MENU SAP TIMER
GUIDE PORTAL INFO
OK
EXIT
MUTE
CC
VOL 
CH
VD/
FLASHBK
79 |