(Continued from previous page)
3.Refer to the appropriate subsection below, depending on the Pro:Centric server configuration, to complete the remaining fields.
RF Configuration
a)In the Media Type field, use the Left/Right arrow keys to select RF.
b)In the Data Channel field, use the Left/Right arrow keys to select the RF channel number that will be used by the Pro:Centric server as its data channel. The Data Channel value can be set from 1 to 135. *
IP Configuration
a)In the Media Type field, use the Left/Right arrow keys to select IP.
Note: By default, the Pro:Centric Manual Configuration screen initially shows RF configuration fields. When you select “IP” as the Media Type, the Data Channel and Signal Strength/Quality fields are replaced with IP Address and IP Port fields.
b)Enter the Pro:Centric server IP address and port number in the IP Address and IP Port fields, respectively. The IP address must match the IPv4 multicast address and the port number must match the port number that is set in the Pro:Centric server.
For each data entry field: Use the arrow keys to select the field and press OK. Then, you can either use the number keys on the Installer Remote to direct enter data values or use the arrow keys to select the appropriate number(s) from the
4.Once all fields are completed as required, you have two options (see also note below):
• To save the data entered and exit the wizard, use the arrow keys to select EXIT and then press OK. In the subsequent
• To initiate a
The
Note: With RF configuration, Pro:Centric server data must be present on the RF channel selected as the STB’s Data Channel in order for you to select “NEXT” (you will see a “data channel found” message below the Signal Quality indicator). With IP configuration, Pro:Centric server data must be present via the wired LAN cable connection in order for you to select “NEXT” (you will see a “IP server found” message below the IP Port field). The “NEXT” button is initially a “SEARCH” button until the data entered is verified.
(Continued on next page)
*PCS150R and later Pro:Centric servers do not support HRC or IRC cable channel frequencies.
22 |