MPI When the STB is in
DISPLAY CONTROL 2
DISPLAY MPI
CONTROL 2
POWER |
| OUT | LAN |
|
HDMI IN 1 & 2
Connections for HDMI output from external devices.
USB 2 & 1
Insert USB memory device for software updates, cloning purposes, FTG Mode configuration, picture/ music entertainment, etc., as applicable.
| IN 1 |
| IN 2 | USB IN 1 | USB IN 2 | |
(ARC) |
|
|
|
|
| |
DIGITAL | AUDIO | AV IN |
| DISPLAY | SERVICE | ANTENNA/ |
AUDIO | LINE OUT | IR IN CONTROL1 | CABLE IN | |||
POWER (DC IN)
Use 19V 
2.1A 
AC/DC power adapter (provided).
HDMI OUT
Use HDMI cable (provided) to connect to display panel HDMI input.
LAN
Use for video IP and/or network connections.
DIGITAL AUDIO (Optical Digital Audio Out)
Use for amps and home theater systems. Note:
When the STB is OFF, this port is not enabled.
AUDIO LINE OUT
(3.5 mm jack) Connect audio equipment to use fixed line level analog audio output. See Reference section, “External Audio Line Out Specifications,” for further information.
ANTENNA/CABLE IN
Connect to Antenna/CATV.
SERVICE
Restricted to service updates.
DISPLAY CONTROL 1
(3.5 mm jack) Use TLM cable provided to connect to LG Public Display/Commercial Monitor display panel’s
IR IN
(3.5 mm jack) Connection for external IR receiver (optional). Use when IR
AV (AUDIO/VIDEO) IN
(3.5 mm jack) Connect composite audio/ video output from external device. Use A/V adapter cable provided.
*Only one DISPLAY CONTROL connection should be used depending on the type of display panel to be controlled. Refer to
75 |