Ez Download Utility (Cont.)
(Continued from previous page)
Note: If there are no files of a particular file type on the USB device, that file type field will not be displayed in the Ez Download screen. For example, if there are no PTC files on the USB device, you will not see a “PTC Software” field in the Ez Download screen.
Note: Press
on the Installer Remote or select BACK, as necessary, to return to the
STB Manager / USB Download Menu. To exit the STB Manager, select CANCEL (if accessed from the STB menus, you may also press EXIT on the Installer Remote to exit). If you accessed the STB Manager via the
7.If more than one USB memory device is currently connected to the STB, be sure to select the
USB device that contains the file(s) you wish to use. If necessary, use the Up/Down arrow keys on the Installer Remote to select/highlight the Select USB Memory Device field and press OK. Then, use the arrow keys to select the appropriate USB device from the
8.To select a file use the Up/Down arrows on the Installer Remote to select/highlight the appropriate file
Note: The utility will only allow you to select one of each file type for downloading. For example, if there are two files in the Ez Download Teach To STB (TLX) list, you can only select one or the other of those two files.
Note: The initial default value for each file type is “None.” After the Ez Download utility is run, a file is automatically created and stored on the USB device that was used. The file, which will have a “.dzm” file extension, maintains a history of the file(s) previously used with the Ez Download utility. The next time(s) you use this USB device with the Ez Download utility, the file(s) selected for the last download will be
Note: If an STB Software (CPU) file is selected, STB SW Version and Update Version fields will be displayed at the bottom right of the screen. Ensure the software version of the selected file is the correct version before applying the update to this STB.
9.If a TLX file that includes an FTG Channel Map is selected, a Channel Tuning / Channel Banner
Display field will be displayed at the right of the screen. If the FTG Channel Map comprises RF channels and Aux inputs only (the latter designated by
Note: If an FTG Channel Map includes IP channels, only logical tuning is available. Also, if the selected TLX file does not include an FTG Channel Map, the message, “No Channel Map in TLX file,” will be displayed at the right of the screen.
10.When you are ready to continue, use the arrow keys on the Installer Remote to select UPDATE, and then press OK.
(Continued on next page)
27 |