IP Environment Setup (Cont.)

(Continued from previous page)

If the network is connected successfully, a “Connected to Internet” message will appear just below the progress display. If the network connection is not successful, the progress display will identify the network element in which the connection failed. Check your cabling and/or verify the configuration data, as necessary.

4.Once the wired network configuration is complete, use the arrow keys on the Installer Remote to

return to the IP Environment Menu, as necessary, or press to return to the previous Network Menu level(s) and/or exit the IP Environment Menu.

Configuring a Wi-Fi Network Connection

1. With the Network Menu on display, use the arrow keys on the

Installer Remote to select Network Setting and press OK.

2. A second Network screen (see example at right), with Wired and

Wi-Fi Connection setup options, will be displayed. Select Wi-Fi

Connection. Then, press OK.

3. In the Wi-Fi screen, available access points are listed in the top

half, while additional menu options are listed in the bottom half, of

the screen. Use the arrow keys on the Installer Remote to select the

desired access point, or select the type of wireless connection to

configure (see descriptions below). Then, press OK.

•

Add a hidden wireless network: Direct enter the SSID of an

 

access point whose SSID has not been enabled for broadcast

 

(i.e., the access point does not appear in the list of access points).

•

WPS PBC: Connect to a network via an access point that

 

is enabled for PBC.

Pro:Centric

Network

Pre-loaded Apps

NETWORK

Wired Connection (Ethernet)

Not Connected

Wi-Fi Connection

Not Connected

• WPS PIN: Complete network/PIN verification via the access

point web interface.

Make sure you have the network security password/PIN available if you are attempting to connect to a secured network.

4.Follow the on-screen instructions to complete the appropriate network configuration. Use the Installer Remote to navigate between fields and make entries, etc.

Note: As with a wired connection, you will have the option to specify the IP configuration for this network connection. Once the initial connection is established, you can select Advanced Settings (initially greyed out) at the bottom of the Wi-Fi screen to view the IP configuration data. In the Advanced screen, select Edit and press OK, and then modify the IP data, as required. See step 3 of the wired connection procedure above for further information on the Edit

IP screen fields.

5.Once the wireless network configuration is complete, use the arrow keys on the Installer Remote to return to the IP Environment Menu,

as necessary, or press to return to the previous Network Menu level(s) and/or exit the IP Environment Menu.

Pro:Centric

Network

Pre-loaded Apps

WI-FI

AAA

BBB

CCC

DDD

EEE

FFF

Add a hidden wireless network

Connect via WPS PBC

Connect via WPS PIN

Advanced settings

58

206-4272