IP Environment Setup (Cont.)

IP Stream Control

If necessary, due to an audio and/or video stream delay, IP Stream Control options enable you to compensate for synchronization irregularities by allowing audio PTS and video PTS offset modifications. This menu also enables you to specify the IGMP version (2 or 3). Note that any modifications to these settings should be performed by qualified personnel only.

1.With the Network Menu on display, use the arrow keys on the Installer Remote to select IP Stream Control. Then, press OK.

2.In the IP Stream Control screen, use the Up/Down arrow keys on the Installer Remote to select/highlight the appropriate field—Audio

PTS Offset, Video PTS Offset, or IGMP Version—and then press OK.

3.If you are modifying an offset value, use the Left/Right arrow keys to select the appropriate value for the selected field. Offset values represent offset time in milliseconds (ms) and can be adjusted from -500 ms to +500 ms in 10 ms increments. When you are done, press OK on the Installer Remote.

If you are modifying the IGMP version, use the Up/Down arrow keys to select the appropriate version number and press OK.

4.Once all modifications are completed as required, use the arrow keys on the Installer Remote to return to the IP Environment Menu,

as necessary, or press to return to the Network Menu and/or exit the IP Environment Menu.

Wake On LAN Setup

The Wake On LAN feature enables the STB to receive software updates and/or be powered ON upon receipt of Wake Up Frame packets and/or Magic Packet data via the wired LAN. To facilitate use of this feature, note that the appropriate wired connection must be made. This menu option enables you to specify Wake On LAN parameters.

1.With the Network Menu on display, use the arrow keys on the Installer Remote to select Wake On LAN. Then, press OK.

2.In the Wake On LAN screen, use the Up/Down arrow keys on the

Installer Remote to select/highlight the desired field and press OK. Then, use the arrow keys to select the desired setting—Disabled, Update, or Power On—from the drop-down list of options.

3.Once all fields are completed as required, use the arrow keys on the Installer Remote to return to the IP Environment Menu, as

necessary, or press to return to the Network Menu and/or exit the IP Environment Menu.

Pro:Centric

Network

Pre-loaded Apps

Pro:Centric

Network

Pre-loaded Apps

IP STREAM CONTROL

Audio PTS Offset ^

0

Video PTS Offset ^

0

IGMP ^

2

WAKE ON LAN

WOL (Wake Up Frame) ^

Disabled

WOL (Magic Packet) ^

Disabled

206-4272

59