Reference: Display Panel SpecificationsThis section describes the types of commercial display panels that may be used with the STB-3000.
LG Hospitality TV Panels
The STB-3000 may be used with LG Hospitality TVs (LY570H, LY560H, etc.) that support Multiple Protocol Interface (MPI).
Use the MPI/MTI cable provided to connect the RJ-12 DISPLAY CONTROL 2 port on the STB- 3000 front jack panel to the MPI port on the rear jack panel of the display.
LG Commercial Monitors & Public Display TV Panels
The STB-3000 may be used with LG Commercial Monitors (M3203CCBA, M3204C, etc.) or Public Display TVs (LD450C, LT560C, etc.) that support the TV-Link Monitor (TLM) interface.
Use the 3.5 mm-to-DB9 TLM cable provided to connect the 3.5 mm DISPLAY CONTROL 1 jack on the STB-3000 rear jack panel to the RS-232 CONTROL connector on the rear jack panel of the display.
Note that when you use these model display panels, you must set Installer Menu item 113 PANEL TYPE appropriately. For example, if you are using an LG Commercial Monitor or Public Display TV that does not support an xb Input Select command, set Installer Menu item 113 to 2. If you are using an LG Commercial Monitor or Public Display TV that does support an xb Input Select command, set Installer Menu item 113 to 4 (default).
Note: Installer Menu item 113 values 0, 1, and 3 are available to support legacy panel types.
Commercial Non-LG TV Panels
The STB-3000 may be used with commercial non-LG TVs that support SONIFI’s Multiple Television Interface (MTI) protocol.
Use the MPI/MTI cable provided to connect the RJ-12 DISPLAY CONTROL 2 port on the STB-3000 front jack panel to the MTI (typically labeled “DATA”) port on the rear jack panel of the display.
Note that some MTI interface configuration may be required on non-LG TVs. Refer to the TV manufacturer’s documentation to determine if any configuration is required.
