Initiate Configuration or Exit the
The Welcome screen provides a brief introduction to the
. Use this setup wizard to configure the STB for Pro:Centric and/or
. If a Pro:Centric Server will not be installed and/or you do not wish to use the wizard to configure this STB for FTG Mode, you may exit the wizard.
Select NO PRO:CENTRIC to disable the Pro:Centric feature of this STB, or select EXIT to quit.
This setup wizard will start automatically in 10 seconds.
NO PRO:CENTRIC | EXIT | NEXT |
Note: If there is no user action in this screen within 10 seconds, the wizard will proceed to the first configuration step. Once the wizard has proceeded, it is not possible to return to the Welcome screen; however, if you simply wish to exit the wizard, you can do so by selecting the “EXIT” option from the subsequent screen(s).
From the Welcome screen, you have the following options:
•To proceed with the
•To exit the wizard, but retain the use of the Pro:Centric remote management feature on this STB (i.e., Installer Menu item 119 DATA CHANNEL set to 255) in the future, use the arrow keys on the Installer Remote to select/highlight EXIT and press OK. In the confirmation
•If you do not intend to install a Pro:Centric server on this system and you do not wish to use the wizard’s Zoning or USB configuration options, exit the wizard as follows: Use the arrow keys on the Installer Remote to select/highlight NO PRO:CENTRIC and press OK. This will disable the Pro:Centric feature of this STB (i.e., Installer Menu item 119 DATA CHANNEL will be set to
0) and exit the wizard. In the confirmation
16 |