The first time you turn ON the STB/display panel, a Please Select the Screen Resolution menu will be displayed, and you will need to select the appropriate
Note: After it is turned ON, the STB begins an initialization process, and it may take several minutes for the Screen Resolution menu to be displayed.
Refer to documentation for the applicable display panel(s) to determine the appropriate resolution setting. The selected resolution should be compatible with the display panel’s native screen resolution.
PLEASE SELECT THE SCREEN RESOLUTION720p
1080p
1366 x 768
1.Use the Up/Down arrows on the Installer Remote to select the appropriate video output resolution option, and then press OK.
The STB’s default video output resolution is 720p. If you select this option, the Please Select the Screen Resolution screen will close and the
If you select one of the other two resolution options (1366 x 768 is selected/highlighted as the recommended resolution), a Changing Screen Resolution message will be displayed, and the STB will reboot within a few seconds to change the resolution per your selection. Continue with step 2.
2.When the STB reboot is complete (it may take a few minutes), you will be prompted to confirm the new video output resolution. Use the arrow keys on the Installer Remote to select YES in the confirmation screen, and then press OK on the Installer Remote.
Note: If there is no user interaction within 10 seconds, or if you select “NO” in the confirmation screen, the STB will reboot and revert to the default resolution. After this reboot is complete, the Please Select the Screen Resolution menu will be redisplayed.
Once you select and confirm the screen resolution, the
Note: If required at a later time, you can also change the screen resolution in the STB Installer Menu (item 105 VID OUT FORMAT) or via USB memory device / TLX file. In either case, the STB will need to reboot (see item 105 description on page 37 for additional information).
14 |