Liebert 610 manual Status Reports Screens, Status reports screen

Operation

3.2.4Status Reports Screens

Go to the Master Menu and move the highlighted cursor to STATUS REPORTS. Press the Select but- ton and the Status Reports screen is displayed.

The Status Report screen is divided into four submenu reports: PRESENT STATUS, EVENT HIS- TORY, HISTORY STATUS and SYSTEM STATUS.

To look at any of the reports, do the following:

1.From the Status Reports screen, press the Up or Down pad to move the highlighted cursor to the desired selection.

2.Press the Select pad to view the desired report page.

3.Use the Up and Down pads to move through a report that includes several screens (frames).

4.Press the Select pad to exit the report.

5.To return to the Master Menu, return to EXIT and press the Select pad.

Each report screen includes the date, time and a frame number. The frame number indicates the rela- tionship sequence of a 4 millisecond time segment.

NOTE

Each of the four Status Reports can be displayed on a remote terminal.

Refer to 3.2.14 - Communication Interfaces.

Figure 13 Status reports screen

© 1989-2003

UP : CURSOR UP

DOWN : CURSOR DOWN

SELECT : CHOOSE

EXIT

PRESENT STATUS

EVENT HISTORY

HISTORY STATUS

SYSTEM STATUS

27