Manuals / Liebert / Computer Equipment / Power Supply

Liebert 610 manual Present Status, Event History

Models: 610

1 104

Download 104 pages 35.06 Kb

Page 34

Operation

Present Status

The Present Status screen shows the current status of the UPS module. This screen displays any alarm messages that are present and the values of the metered parameters for each cabinet.

Each update sequence (every 4 milliseconds) is called a frame. The frame number is displayed in the upper right corner. The Present Status screen display is updated every two seconds.

Battery Time Remaining (in minutes) is displayed on the module screens during a battery discharge. The value is on the Battery Volts line in the TIME column (far right side of the screen). For the first two minutes of discharge, the Rated Time Remaining is displayed. After that, the Calculated Time Remaining is displayed and updated every six seconds.

All the information on this screen, including Battery Time Remaining, is available to a local terminal or modem through the communications ports provided in the Series 610 UPS. Refer to Table 6 in this manual for keyboard commands to use with the communication ports.

Figure 14 Present status report screens

PRESENT STATUS	MODULE-0			01/12/96	14:06:26 FRAME 35
ORDER - 000000	SITE ID - 00000		SITE TAG - 0000000
** ACTIVE ALARMS ** Batt Discharging
	A	B	C	DC	LOAD HERTZ TIME
OUTPUT VOLTS	480	480	480
OUTPUT AMPS	325	325	325		60.0
OUTPUT FREQUENCY				480	60.0
BATTERY VOLTS				480	0:09
BATTERY AMPS				-645
INPUT VOLTS	0	0	0
INPUT AMPS	0	0	0
LOAD KVA					270

END OF REPORT

SELECT : EXIT

Event History

The Event History screen lists the active alarms present in the UPS. This screen also displays the prior 128 alarm frames, in a first in, first out (FIFO) sequence, that have taken place along with the date and the time that each alarm frame occurred. Use the Up and Down pads to look through the different alarm frames.

Figure 15 Event history report screen


EVENT HISTORY	MODULE-0	01/17/96 11:23:41 FRAME 175
ORDER - 000000	SITE ID - 00000	SITE TAG - 0000000
** ACTIVE ALARMS ** Batt Discharging			Low Batt Warning

UP : NEXT FRAME

DOWN : PREVIOUS FRAME

SELECT : EXIT

28

Image 34

Liebert 610 manual Present Status, Event History

Contents

Series 610 UPS Battery Cabinet Precautions Table of Contents Maintenance Specifications Figures Tables Important Safety Instructions System Description Designed for Success ReliabilityOther Factors to Consider Safety Precautions Modes of Operation Operator Controls Options Battery Load Testing Customer Alarm InterfaceTemperature-Compensated Charging Automatic Restart General Component Descriptions Battery PlantUPS Module Controls Hardware Detailed Component DescriptionsSoftware Operation Input Power FactorRectifier/Charger Input Circuit Breaker Battery Charge Current Limiting Battery Charging CircuitBattery Disconnect Battery Equalize Charge Circuit Inverter Non-Linear Load CharacteristicsUnbalanced Load Characteristics Output Regulation and Overload Performance Bypass Circuit Breaker Static Switch Backfeed ProtectionStatic Bypass Pulsed Parallel Operation Transfer and Retransfer Conditions Three Breaker Maintenance Bypass Switchboard Features Display Screen and Operator Controls Operator controls, typical system 100kVA 500kVA 1000kVA Description Function Series 610 UPS operator control panel Description Function Menu Tree Navigation Menu tree Master Menu Screen Master menu screen Operation Input Metering Displays Monitor/Mimic Display ScreenOutput Metering Displays Item 7 Alarm Messages Status/Alarm Message AreasItem 6 Status Messages Monitor/Mimic display example Utility fail Walk-In Display Screen Walk-in display screen Status Reports Screens Status reports screen Present Status Event History History Status History status report screen Battery Cycle Monitor System Status Battery cycle monitoring summary screen System Configuration Screens System configuration screens Maximum Auto-Retransfer Attempts Maximum auto-retransfer attempts screen Date Date screen Time Time screen Auto Dial Auto dial screen Language Selection System Options Continuous Duty Static Switch Optional Remote Monitor Alarm messagesAdditional alarm messages Standard Remote Monitor Indications Channel Battery Discharging Alarm Limit Settings ScreenOverload Alarm Low Battery Battery Rating Battery Shutdown 60 MinutesBattery Rating 100% Temperature Limit Setting Optional Load Transfer Procedures Screen Load transfer procedure screen Start-Up Procedures Screen Refer to 3.4.1 Start-Up Procedure for more details Shutdown Procedures Screen Battery Time Screen Battery time screen 15-minute discharge Upper Limit Actual Lower Limit Elapsed Time Minutes Meter Calibration Screen Status Reports Screens Battery Equalize Screen Battery equalize screen Alarm and Status Messages Status Messages Alarm and status message screen Alarm Messages Abbreviations used in alarm messages Alarm messages and corrective actions AC Input UPS System UPS System Cooling Alarm messages-summary Alarm Message Special Functions Worldwide Reporting Communication InterfacesAuto-Dial Site Reporting SiteScan or Snmp Local Reporting to a TerminalLocal Reporting to a Monitor Requesting Information Separate / Simultaneous Outputs Series 610 terminal commandsRemote Monitor Panel Keys Function Circuit breaker abbreviations Load on BypassAbbreviation Circuit Breaker OK to Transfer Load on bypass UPS available Load on UPS bypass available Momentary overload through pulse-parallel static switch Momentary Overloads Input Power Failure-Load on Battery Input power fail-load on battery Off Battery Load on UPS-battery not available Refer to 3.4.4 Shutdown Procedures Emergency Module Off Remote Emergency Power Off Emergency power off Refer to 3.3.9 Maintenance Bypass Module Shutdown Load on maintenance bypass two breakers Load on maintenance bypass three breakers Manual Procedures Start-Up Procedure Start-Up Procedure Set the Static Switch Disconnect or to OFF open Start-up procedures Start-Up Procedure Load Transfer Procedures Load transfer procedures screen Maintenance Bypass Load Transfers Shutdown Procedures Module Shutdown Procedure Shutdown Procedures Remote Emergency Power Off Repo Local Emergency Modules Off Lemo Battery Exercise Procedures Battery exercise control screen above and results below 1000% Automatic OperationsOverloads Without Transfer 150% Automatic Transfers to Bypass Overload Condition Automatic Retransfers to UPS Automatic Transfers to Bypass UPS System Faults Enabling Automatic Restart Automatic Restart OptionalSequence of Operation Maintenance Professional Start-Up Liebert Global ServicesMaintenance Agreements The Signature Program Training Record Log Routine MaintenanceAir Filters Limited Life Components Battery Maintenance Battery Safety Precautions Avertissement Matching Battery Cabinets Optional Number of Cells Battery Voltage VDC Nominal Float Battery voltage record Battery retorque valuesRack-Mounted Batteries Detection of Trouble Torque specifications unless otherwise labeledTorque Requirements Corrective Actions Reporting a ProblemUpstream Feeder Circuit Breaker Setting Inspections Recommended Test Equipment Rating Power factor pf KVAKVA Specifications applicable to environment Environmental Conditions Adjustments Battery Operation Electrical Specifications Page Locations Technical Support/ServiceCompany Behind the Products United States