Liebert PDUTM, STS2 manual Display Overview, Touch Screen Display

Touch Screen Display

13.0TOUCH SCREEN DISPLAY

The STS2/PDU can be configured with a Color Graphical LCD touch screen display that allows you to quickly check the status of the unit and identify problems.

A touch screen LCD is available through the front of the STS2/PDU. This screen provides a graphical (Mimic) display of the switch’s operation, plus system information including system parameters, alarms and faults.

The LCD provides a color, back-lit touch screen as a user interface. In addition to the Mimic and the system parameters, the screen provides a series of menus to allow you to configure the STS2/PDU, including the control of the preferred source, auto/manual retransfer selection, alarm notification and other system setpoints. The touch screen also provides buttons to reset alarms and turn off audible alarms, such as a horn.

13.1Display Overview

The STS2/PDU Color Graphical Display provides three areas of information, plus buttons and a series of menu choices.

The Color Graphical Display contains the following features:

•Mimic — a graphical diagram of the status of the unit.

•Event controls — allow you to reset alarms and turn off audible alarms.

•Event display — displays any active alarm or fault condition, in real-time.

•Menus — provide choices and configuration settings in dialog boxes or information in the display panel.

•Display panel — provides additional information, depending on the menu choice that was last selected. This information includes event help text and startup and bypass procedures.

Figure 62 STS2/PDU Touch Screen Display

Mimic

Event controls

Event display

Display panel and

help screen

Menu options

96