TROUBLESHOOTING | ||
| Observe all Safety Guidelines detailed throughout this manual |
|
ERROR CODES FOR THE POWER WAVE®
The following is a partial list of possible error codes for the POWER WAVE® i400. For a complete listing consult the Service Manual for this machine.
WIRE DRIVE MODULE
| Error Code # | LECO | Indication |
|
| (FANUC#) |
|
81 | Motor Overload | 129 | Long term average motor current limit has been exceeded. Typically |
|
|
| indicates mechanical overload of system. If problem continues con- |
|
|
| sider higher torque gear ratio (lower speed range). |
82 | Motor Overcurrent | 130 | Absolute maximum motor current level has been exceeded. This is a |
|
| short term average to protect drive circuitry. | |
|
|
| |
|
|
|
|
83 | Shutdown #1 | 131 | The Shutdown inputs on the POWER WAVE® i400 have been dis- |
|
|
| abled. The presence of these errors indicates the Feed Head Control |
84 | Shutdown #2 | 132 | PCB may contain the wrong operating software. |
| |||
|
|
|
|
CAUTION
If for any reason you do not understand the test procedures or are unable to perform the tests/repairs safely, contact your Local Lincoln Authorized Field Service Facility for technical troubleshooting assistance before you proceed.
POWER WAVE® i400
