Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
TROUBLESHOOTING & REPAIR | ||
|
|
FAN MOTOR AND FAN REMOVAL AND REPLACEMENT
7.Remove the fan motor.
a.Loosen and remove the two screws from the motor mounting bracket using a slot head screw driver.
b.When the motor is free from the mounting bracket, place it care- fully on the bottom of the machine.
c.Cut any necessary wire wraps bundling the motor leads.
d.Remove the leads from the fan motor.
8.Install the replacement motor in the reverse order of removal.
9.Install the fan blade. When installing the fan blade, the blade is flush with the end of the motor shaft.
a.Spin the fan to be sure it is free to rotate.
10.Reassemble the remaining compo- nents in reverse order of removal.
