Lincoln Electric SP-250 service manual Spool GUN Connection, Figure C.5 Spool Gun Connect

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Section TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

Return to Master TOC

C-4 ACCESSORIES C-4

SPOOL GUN CONNECTION

CAUTION

CAUTION: The spool gun module is intended for use with Lincoln Electric Magnum Spool Guns only. Use with other units may cause damage to the equipment. For Spool Gun operation, refer to the instruction man- ual provided with the Magnum Spool Gun.

1.Connect the spool gun control cable 6-pin plug to mating receptacle on the front of the spool gun adapter connection box.

NOTE: If using a K469 spool gun with 4-pin plug, use the K518 adapter.

2.Insert the Twist-Mate plug into the mating recepta- cle on the front of the connection box and twist to lock the connection.

3.Attach the spool gun gas line to the gas outlet fit- ting on the front of the connection box.

4.Refer to the Instruction Manual included with the K487 or K469 Spool Gun for more detail in Spool Gun set-up and operation.

Figure C.5 - Spool Gun Connect.

IDEALARC SP-250