Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Section TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
Return to Master TOC
INSTALLATION
TECHNICAL SPECIFICATIONS (Cont’d) - PRO-CUT 55
GAS REQUIREMENTS
Required Gas Flow Rate | Required Gas Inlet Pressure | |||
70 PSI @ 360 SCHF | 80 to 150 PSI | |||
(4.8 Bar. @ 10160 LHR) | (5.4 Bar. to 10.2 Bar.) | |||
(6 CFM) |
|
|
|
|
|
| |||
RECOMMENDED INPUT WIRE AND FUSE SIZES | ||||
For all plasma cutting applications based on U.S. National Electrical Code | ||||
| Ambient Temperature 30°C or Less |
|
| |
AC Input Voltage | Fuse (Super Lag) | Type 75°C |
|
|
at | Circuit Breaker | Copper Wire in Conduit AWG | ||
60 Hertz | (Delay Type) | (IEC) Sizes |
|
|
|
|
|
|
|
|
| 2 Input Supply Wires | 1 Ground Wire | |
230VAC Single Phase | 70 Amps | #8 (8.4mm2) | #10 (5.3mm2) | |
460VAC Single Phase | 40 Amps | #8 (8.4mm2) | #10 (.3mm2) | |
230VAC Three Phase | 40 Amps | #10 (5.3mm2) | #10 (5.3mm2) | |
460VAC Three Phase | 20 Amps | #10 (5.3mm2) | #10 (5.3mm2) | |
| PHYSICAL | DIMENSIONS |
|
Height | Width | Depth | Weight with |
|
|
| Torch Cable |
12.6 Inches | 11.0 Inches | 26.0 Inches | 70 lbs. (32 kg.) |
320 mm | 280 mm | 660 mm | (25 ft. cable) |
|
|
| 85 lbs. (39 kg.) |
|
|
| (50 ft. cable) |
|
|
|
|
