Section 2:
Installation & Accessories
Power
The iFINDER operates from AA batteries or on 3 volts DC using an optional external power cable with a cigarette lighter adapter. When the power cable is used, the iFINDER automatically switches to it if the external power is greater than the battery voltage. If the external power fails, the unit automatically switches to the batteries.
Flash memory will keep your stored data safe and accessible for the life of the product — after the unit is turned off, no battery or external power is needed to store your data.
Batteries
The unit requires two, 1.5 volt AA batteries. We recommend that you use alkaline batteries for the best
You can also use rechargeable AA alkaline batteries, such as those made by RAYOVAC, or rechargeable AA nickel metal hydride (NiMH) batteries. We do not recommend nickel cadmium (NiCd) rechargeable batteries because we tend to get poor battery life from them.
Rechargeable alkaline batteries will not last as long as standard alka- line batteries. However, rechargeable NiMH batteries should give you suitable battery life.
Lithium batteries are lighter than alkaline, and with some brands of lithium battery the iFINDER Map & Music will float. We've tested the iFINDER Map & Music using Energizer e2 lithium batteries, and it remained afloat.
NOTE:
The battery gauge on the Satellite Status Page may not read accu- rately with some battery brands because discharge rates can vary significantly. This is especially true for rechargeables. This battery gauge was calibrated for alkaline batteries.
Do not mix different battery types. Mixing battery types may cause leak- age. (For example, don’t use both alkaline and NiMH batteries at the same time, and don't use standard alkalines with rechargeable alkalines.)
7
