Find Your Current Position
Finding your current position is as simple as turning iFINDER on. Un- der clear sky conditions, the unit automatically searches for satellites and calculates its position in approximately one minute or less.
NOTE:
"Clear sky" means open sky, unobstructed by terrain, dense foliage or structures. Clouds do not restrict GPS signal reception.
If for some reason satellite acquisition takes longer, you may be inside a structure or vehicle or in terrain that is blocking signal reception. To correct this, be sure you are positioned so that the unit has as clear a view of the sky as possible, then turn the unit off and back on again.
Find Distance From Current
Position To Another Location
1.While on the Map page press: MENU↓ to FIND DISTANCEENT.
2.Center your cursor over the position you want to find the distance to. A rubber band line appears, connecting your current position to the cursor's location. The distance along that line will appear in the lower
3.Press EXIT to return to regular operation.
The distance to Dallas from the starting point is 211.1 miles.
Find Distance From Point to Point
You can also measure distance between two other points on the map.
1.While on the Map page press: MENU↓ to FIND DISTANCEENT.
2.Center your cursor over the first position. (A rubber band line ap- pears, connecting your current position to the cursor's location.) Press ENT to set the first point, and the rubber band line disappears.
33
