WARNING:
If you uncheck the Update Trail option, automatic trail creation and recording will be turned off, and you must turn it back on to record trails. The default setting is on.
Press ↓ or ↑ to UPDATE TRAILS. With the option highlighted, press ENT to check it (turn on) and uncheck it (turn off.)
Update Trail Criteria (Auto, Time, Distance)
The options are automatic, time, or distance. When it's in the default automatic mode, the unit doesn't update the plot trail while you're traveling in a straight line. Once you deviate from a straight line, the unit "drops" a plot point (trail waypoint) onto the trail. This conserves plot trail points. If a plot trail uses all of the available points allotted to it, the beginning points are taken away and placed at the end of the trail.
Trail Options menu.
Press ↓ to UPDATE CRITERIAENTpress ↓ or ↑ to select criteria typeENT.
Trail Update Rate (Time, Distance)
You can update a trail by time, with a range from 1 second to 9999 sec- onds; the default is 3 seconds. You can update by distance, with a range from 0.01 mile/nm/km to 9.99 mile/nm/km; the default is 0.10 mile.
With Update Criteria selected, press ↓ to either the rate or distance data entry boxes and press ENT. Press ↑ or ↓ to change the first charac- ter, then press → to the next character and repeat until the entry is correct. Press EXITEXIT to return to the Trail Options Menu.
80
