Marathon Monitors Inc.
AACC 2000 Carbon Nov. 1, 1997
63
CONFIGURATION
This chapter consists of six topics:
• SELECTING CONFIGURATION LEVEL
• LEAVING CONFIGURATION LEVEL
• SELECTING A CONFIGURATION PARAMETER
• CHANGING THE PASSWORDS
• NAVIGATION DIAGRAM
• CONFIGURATION PARAMETER TABLES.
In configuration level you set up the fundamental characteristics of the controller.
These are:
• The type of control (e.g. reverse or direct acting)
• The Input type and range
• The Setpoint configuration
• The Alarms configuration
• The Programmer configuration
• The Digital input configuration
• The Alarm Relay configuration
• The Communications configuration
• The Modules 1, 2 & 3 configuration
• Calibration
• The Passwords.
WARNING
Configuration is protected by a password and should only be carried out by a
qualified person, authorised to do so. Incorrect configuration could result in
damage to the process being controlled and/or personal injury. It is the
responsibility of the person commissioning the process to ensure that the
configuration is correct.