Marathon Computer AACC 2000 manual Module config, 1A b C1 Module 1 configuration, Cool

Marathon Monitors Inc.

JA		module config
NO configuration required
Name			Description	Values	Meaning
1A b C(1)			Module 1 configuration
/	/
id			Identity of module installed	nonE	Module not fitted
				rELy	Relay output
				dC.OP	Non-isolated DC output
			(1) If a dual-, or triple-, channel	LoG	Logic/ output
			module is installed then the list	LoG.i	Logic input
			headers 1b and 1C also appear	SSr	Triac output
				dc.rE	DC retransmission
					(isolated)
				dc.OP	Isolated DC output

For ‘id’ = ‘rELy’, ‘LoG’, or ‘SSr’ use this parameter table:

Func	Function						nonE	Function disabled
							dIG	Digital output function
	(Only Channels 1A and 1C can be						HEAt	Heating output
					Heating, or Cooling)		COOL	Cooling output
							up	Open motorised valve
							dwn	Close motorised valve
					(Only if ‘id’ = ‘LoG’)		SSr.1	mode 1 heating
					(Only if ‘id’ = ‘LoG’)		SSr.2	mode 2 heating
VAL.L			Displayed Value					% PID demand signal
								giving minimum output −
		VAL.H
								‘Out.L’
VAL.H								% PID demand signal
								giving maximum output −
						Retransmitted		‘Out.H’
			VAL.L
						Output
				0%	100%
Out.L								Minimum average power
Out.H								Maximum average power
SEnS	Sense of output						nor	Normal (output energises
	(Only if ‘Func’ = ‘dIG’)							when TRUE, e.g
								program events)
							inv	Inverted (output de-
								energises when TRUE,
								e.g. alarms)

Notes:

1.When ‘SEnS’ appears, then further parameters are available. These are identical to those in the ‘AA ConF’ list on Page 6-12.

AACC 2000 Carbon 77 Nov. 1, 1997