Network Configuration
There are several ways or Network Interfaces that you can use to config- ure the hub. You must set up the hub using Local Console management to enable the other management capabilities:
•Mini Console (see Chapter 3)
•Local Console/Remote Telnet
•
•SNMP Management
The Network Configuration Menu allows setting up Ethernet and SLIP connections to the hub. Network Interface <1> is used to configure Ethernet connections and Network Interface <2> is used to configure SLIP connections.
Local Console/Remote Telnet-Ethernet
An Ethernet connection allows you to monitor and configure the hub with a Local Console via Telnet Session, a Web browser or SNMP management. You need to configure the IP Address and Subnet Mask to work with your LAN settings before you can make an Ethernet connection.
