Serial Port Configuration

The Serial Port Configuration Menu is used to configure Console Mode connections to a VT-100 terminal emulator and Out-of-Band serial connections to a modem.

ConsoleMode

To view the Console Mode settings, select “Console” Mode in the Serial Port Configurations. Console Mode settings are read only. Use the settings as shown below.

Console Operation Mode

Out-of-BandMode

Out-of-Band mode enables setting up serial port configurations for making a connection to the hub using a modem.

To make Out-of-Band serial connections use the Out-of-Band operation mode in the Serial Port Configurations Menu shown on the next page.

72 CenturyStack 8100 Managed Hub

Page 72
Image 72
METRObility Optical Systems 8124-01-M manual Serial Port Configuration, ConsoleMode, Out-of-BandMode