METRObility Optical Systems 8124-01-M manual Monitoring Individual Port Status

POLAR REVERSE	The receiver (Rx) polarity has been
	automatically crossed by the hub.
NO AUTO PART	Indicates all ports not auto partitioned.
AUTO PART	Indicates all Auto Partitioned ports.
ENABLED	Indicates all Enabled ports.

DISABLED

Indicates all Disabled ports.

Monitoring Individual Port Status

To view the status of individual ports:

1.Press <Next> until “PORT STATUS” displays in the Message Zone.

2.Press <Enter> to go to the port selection menu. “ALL PORTS” displays in the Message Zone.

3.Press <Next> to select an individual port. “PORT 1” displays in the Message Zone. After a slight delay, the status of Port 1 is automatically cycled through, displaying the status of Port 1.

K % 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 G-A
80	G-B
40	G-C
20
10	G-D
5	ID
3	Master
1	WWW
	SNMP
	O-O-B

Port Status

4.Press <Next> to view port status of the next port. After a slight delay the status of the selected port is automatically cycled through, displaying the status of the selected port.

5.Press <Next> to view port status of other ports.

Managing Through the Mini Console 49