METRObility Optical Systems 8124-01-M manual Restarting the Hub, Restoring System Default Setup

Restarting the Hub

The hub will use your configurations to set up the system when it restarts. Restart the system with the Restart Menu using the following steps:

1.Scroll to UNIT CONFIG and press <Enter>.

2.Scroll to SYS RESTART and press <Enter>.

3.Press <Enter> at “CONTINUE” or press <Next> to abort the action at the menu option “CANCEL”.

4.Press <Enter> to confirm.

K % 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 G-A
80	G-B
40	G-C
20
10	G-D
5	ID
3	Master
1	WWW
	SNMP
	O-O-B

System Restart-Continue

Restoring System Default Setup

The factory default configurations are selected from the SYS DEFAULT menu, a sub menu of the Main Menu item “UNIT CONFIG”. The factory defaults are the settings that were set at the factory before shipping the hub. Restore the default settings with the following steps:

1.Press Enter at the “SYS DEFAULT” menu option. “CONTINUE” displays in the Message Zone.

2.Press <Enter> to restore factory defaults or press <Next> to scroll to CANCEL and press Enter to cancel the operation.

CAUTION: Restoring the system default settings overwrites all custom settings, including password, port configurations, and unit configurations.

Managing Through the Mini Console 59