
2.2 Setup Flow
You have to set up your printer to use it. And you can adjust some features by customizing them. This section describes the setup.
The setup flow of preparing to use printer is below.
1.Printer setup
❏Install Roll Paper
❏Install the battery pack or connect the printer to the AC adapter
(See “2.4 Providing power to the printer” (page
2.Adjust various settings (If you need to)
❏Memory switches
❏Paper width
(Adjust the spacer & Memory switches)
(See “2.5 Adjusting Various Settings” (page
3.Install to your wireless LAN by either method.
❏Using utility (TMNet WinConfig)
•with wireless LAN
•with serial connection (RS 232C
❏Using browser
•with wireless LAN
(See “2.6 Installing your wireless LAN” (page
When you select Direct control method (ESC/ POS command,) you don’t need to install any drivers.
4.Driver setup
❏OPOS
❏APD
(See “2.7 Install a Printer Driver in the Host PC / POS Terminal,” page
5. Complete setup
| Rev. D |