Epson TM-P60 manual Hexadecimal dump mode can’t be used with Opos or the APD

TM-P60 Technical Reference Guide

4.Run any software program that sends data to the printer. The printer prints “Hexadecimal Dump” and then all the codes it receives in a two-column format. The first column contains the hexadecimal codes and the second column gives the ASCII characters that correspond to the codes. Part of a hexadecimal dump is shown below:

Hexadecimal Dump

To terminate hexadecimal dump,press

FEED button three times.

1B	21	00	1B	26 02 40	40	40	40	. ! . . & . @			@	@	@
1B	25	01	1B	63 34 00	1B	00	1B	. %	. . c	4 . . . .
41	42	43	44	45 46 47	48	41	42	A B	C D E	F G	H	A	B

•A period (.) is printed for each code that has no ASCII equivalent.

•In hex dump mode all commands except real time ESC/POS commands are disabled.

5.Press the FEED button twice to print the last line.

6.Pressing the FEED button two times turns off the hex dump mode and returns the printer to the normal mode. Or, reset the printer to turn off the hex dump mode.

Note:

The hexadecimal dump mode can’t be used with OPOS or the APD.

Rev. D Troubleshooting 3-7