METRObility Optical Systems 8124-01-M Link StatusChange Notify, Port Bridge Module Control/Status

Link T est: Enable or disable link testing.

Speed Control: The port speed. The port automatically connects to the 10Mbps or 100Mbps segment based on its port speed.

•Auto Negotiate: The speed is detected and the duplex mode is forced to half duplex.

•Force 10-TP:The port speed is forced to 10Mbps.

•Force 100-TP:The port speed is forced to 100Mbps.

Link StatusChange Notify

•Enable: The trap is sent.

•Disable: The trap is not sent.

NOTE: Whenever the Port Link Status is changed, the “hubPortLinkStsChgTrap” will be raised by the hub.

2/3 Port Bridge Module Control/Status

This menu displays settings and allows configuring a bridge (switch) module in a given hub in the stack.

2/3 Port Switch Module Control/Status Menu

Master Hub Configuration & Console Management 87