11A-8-64G9 ENGINE (E - W) - Rocker Arms and Camshafts

MD998713

Slit

Journal

Dowel pins

"EA OIL SEAL INSTALLATION

"FA LASH ADJUSTER INSTALLATION

Caution

DIf the lash adjuster is re-used, clean the lash adjuster. (Refer to 11A-8-10.)

(1)Fit the lash adjuster onto the cylinder head using care not to allow diesel fuel to spill out.

"GACAMSHAFT INSTALLATION

(1)Apply engine oil to the camshaft journals and cam before installing the camshaft. Use care not to confuse the intake camshaft with the exhaust camshaft.

NOTE

The rear end of the intake camshaft is provided with a 4 mm-wide slit.

"HA BEARING CAP INSTALLATION

(1) Locate the camshaft dowel pins as illustrated.

(2)Apply sealant to the locations shown in the illustration.

Specified sealant:

3M ATD Part No. 8660 or equivalent

E Mitsubishi Motors Corporation

Dec. 1998

PWEE9502-E

Revised