11A-8-84G9 ENGINE (E-W) - Rocker Arms and Camshafts

<DOHC-GDI for CARISMA (Up to 2000 model), SPACE STAR (1999 model), SPACE RUNNER>

<DOHC-GDI for CARISMA (From 2001 model),

SPACE STAR (From 2001 model), GALANT, PAJERO io>

Engine front side

<DOHC-GDI for CARISMA (Up to 2000 model), SPACE STAR (1999 model), SPACE RUNNER>

<DOHC-GDI for CARISMA (From 2001 model),

SPACE STAR (From 2001 model), GALANT, PAJERO io>

Engine front side

MD998713

(4)Apply sealant to the illustrated position of the cylinder head upper surface.

Specified sealant:

Mitsubishi Genuine Part No. MD970389 or equivalent

(5)Install the beam camshaft cap before the sealant applied becomes dry and hard.

(6)Tighten the bolts to the specified torque in the order shown in the illustration.

M6 bolt 11Nm

M8 bolt 21Nm

Caution

The M8 bolts plated green cannot be reused. Always replace such bolts with M8 bolts finished by glossy plating which are available separately.

The M8 bolt finished by glossy plating is reusable; if the caps have already been assembled with such bolts, then reassemble the caps using them.

(7)Install the camshaft oil seal (use the special tool) and the thrust case <DOHC-GDI for PAJERO io - 4G93> before the sealant applied becomes dry and hard.

(8)Wipe off squeezed out excess sealant from the circumference of the beam camshaft cap.

E Mitsubishi Motors Corporation

1995

PWEE9502-H

Revised

MayJul 2000