4G9 ENGINE (E - W) - Timing Belt |
Idler pulley
Water pump sprocket
Tensioner pulley
Crankshaft sprocket
(6)Secure the timing belt with a paper clip at the illustrated position.
(7)Fit the belt to the idler pulley water pump sprocket, crankshaft sprocket and tensioner pulley in that order.
(8)Raise the tensioner pulley in the direction of an arrow and tighten the tensioner pulley bolt.
(9)Remove the two paper clips.
(10)Make sure that all timing marks are in alignment. (11)Give a 1/4 counterclockwise turn to the crankshaft. Then
turn the crankshaft clockwise to align the timing marks again.
E Mitsubishi Motors Corporation | May 1995 | PWEE9502 |