4G9 ENGINE (E - W) - Cylinder Head and Valves |
Painted end
Spring retainer
Stem seal
Spring seat
"BA VALVE SPRING INSTALLATION
(1)Install the valve spring with the painted end on the rocker arm side.
Except
MIVEC
MD998772
MIVEC
MD998772
MD998784
MD998735
"CA RETAINER LOCK INSTALLATION
(1)The valve spring, if excessively compressed, causes the bottom end of retainer to be in contact with the stem seal, and damage it.
Shank length
"DA CYLINDER HEAD BOLT INSTALLATION
(1)When installing the cylinder head bolts, check that the shank length of each bolt meets the limit. If the limit is exceeded, replace the bolts.
Limit: Max. 96.4 mm
(2)Install the washers as illustrated.
(3)Apply engine oil to the bolt threads and washers.
E Mitsubishi Motors Corporation | Nov. 1995 | Revised |