4G9 ENGINE (E - W) - Timing Belt |
Rounded edge
Abnormal wear (Fluffy strand)
Rubber exposed
Tooth missing and canvas fiber exposed
11 mm
98 to 196 N
Stroke
(6)Abnormal wear of belt sides. The sides are normal if they are sharp as if cut by a knife.
(7)Abnormal wear on teeth.
(8)Missing tooth.
TENSIONER PULLER, IDLER PULLEY
(1)Check the pulley for smooth rotation, excessive play, abnormal noise. Replace it if necessary.
(1)Check the tensioner for oil leaks. Replace it if necessary.
(2)Check the rod end for wear or damage. Replace the tensioner if necessary.
(3)Measure the rod projection length. If not within the standard value, replace the tensioner.
Standard value: 11 mm
(4)Press the rod by a force of 98 to 196 N and measure the rod stroke. If not within the standard value, replace the tensioner.
Standard value: 1 mm or less
E Mitsubishi Motors Corporation | May 1995 | PWEE9502 |