11A-6d-24G9 ENGINE (E-W) - Intake and Exhaust Manifold <4G94-GDI for PAJERO io>

Shear-droop

Exhaust manifold

Bracket

Intake manifold

Intake manifold stay

Cylinder block

INSTALLATION SERVICE POINTS

"AA EXHAUST MANIFOLD BRACKET INSTALLATION

(1)The washers must be installed with the shear-drooped side toward the bolts.

(2)Temporarily install the exhaust manifold bracket as shown in the illustration.

(3)Verify that the bracket is brought into close contact with the boss on the exhaust manifold, then tighten the bolts to the specified torque.

"BA INTAKE MANIFOLD STAY INSTALLATION

(1)Check to ensure that the intake manifold stay is in close contact with the intake manifold and the cylinder block before tightening the respective mounting bolts to the specified torque.

E Mitsubishi Motors Corporation

July 2000

PWEE9502-H

Added