Timing belt side

4G9 ENGINE (E-W) - Rocker Arms and Camshafts

11A-8-7

 

 

Cap No.

IN or EX side identification

<DOHC-GDI for CARISMA (Up to 2000 model), SPACE STAR (1999 model), SPACE RUNNER>

Dowel pin

<DOHC-GDI for CARISMA (From 2001 model), SPACE STAR (From 2001 model), GALANT,

PAJERO io>

Dowel pin

Approx.

Approx.

106_

150_

<DOHC-GDI for CARISMA (Up to 2000 model), SPACE STAR (1999 model), SPACE RUNNER>

3 mm

Beam camshaft cap

<DOHC- GDI for CARISMA (From 2001 model), SPACE STAR (From 2001 model), GALANT, PAJERO io>3 mm

Beam camshaft cap

E Mitsubishi Motors Corporation

1995

May 2000

(3)The bearing caps No. 2 through No. 5 are of the same shape. Before they are installed, check the cap number and the intake and exhaust identification marks.

Identification mark (stamped on front and No. 2 through No. 5 bearing caps)

L:Intake side

R:Exhaust side

(4)Make sure that the rocker arms are installed in the specified locations.

"IA BEAM CAMSHAFT CAP INSTALLATION

(1) Locate the camshaft dowel pin as illustrated.

(2)Turn the crankshaft anticlockwise a quarter turn (90_).

(3)Apply a 3 mm thick continuous bead of sealant to the bottom surface of the beam camshaft cap along the groove.

Specified sealant:

Mitsubishi Genuine Part No. MD970389 or equivalent

PWEE9502-G

Revised