Cylinder number
Piston pin setting tool: MD998780
Push rod | Guide A: | |
17.9 mm | ||
|
Guide B
Guide A: 18.9 mm
Guide C | Guide A: |
| 20.9 mm |
Base
Guide A: 21.9 mm
REMOVAL SERVICE POINTS
AA"CONNECTING ROD CAP REMOVAL
(1)Mark the cylinder number on the side of the connecting rod big end for correct reassembly.
AB"PISTON PIN REMOVAL
Piston pin setting tool (MD998780) consists of the parts shown in the illustration at left.
To remove the piston pin, Guide D (MB991659) is also used in combination with the Piston pin setting tool.
Push rod
Front mark
Front mark
Guide D
Base
(1)Insert the Push Rod (special tool) into the piston from the side on which the front mark is stamped in the piston head, and attach the guide D to the push rod end.
(2)Place the piston and connecting rod assembly on the Piston Pin Setting Base (special tool) with the front mark facing upward.
(3)Using a press, remove the piston pin.
NOTE
Keep the disassembled pistons, piston pins and connecting rods in order according to the cylinder number.
E Mitsubishi Motors Corporation | Nov. 1995 | Revised |