MD998727MD998727
Alignment dots
REMOVAL SERVICE POINTS
AA"OIL PAN REMOVAL
(1)Knock in the special tool deeply between the oil pan and the cylinder block.
(2)Hitting the side of the special tool, slide the special tool along the oil pan to remove the oil pan.
AB"REMOVAL OF UPPER OIL PAN
(1)At first remove the bolt (Length: 121 mm <DOHC, DOHC- GDI for CARISMA>, 116 mm <DOHC- GDI for PAJERO io>) which is nearest to flywheel, and the remove the other bolts.
Caution
Never use the special tool (oil pan remover), etc.
AC"OUTER ROTOR/INNER ROTOR REMOVAL
(1)Make alignment dots on the outer and inner rotors for reference in reassembly.
Alignment dots
INSTALLATION SERVICE POINTS
"AAINNER ROTOR/OUTER ROTOR INSTALLATION
(1)Apply engine oil to the rotors. Then, install the rotors ensuring that the alignment dots made at disassembly are properly aligned.
3 mm diameter bead sealant
"BASEALANT APPLICATION TO OIL PUMP CASE
Specified sealant:
Mitsubishi Genuine Part No. MD970389 or equivalent
E Mitsubishi Motors Corporation | Dec. 1998 | Revised |